Place an Online HVAC Service call
Projects
Office R&D Class A Office Space
 |
Network Appliance Building 8This 5 story corporate Class A office building connects to Network Appliances corporate headquarters. This design / build project is being constructed with a state of the art chilled water plant serving custom air handling units. The building houses Network Appliance’s employee work out facilities; including a complete gymnasium that is also used for all hands meetings and corporate presentations. This project was built using LEED techniques. General Project Data:
|
 |
Apple ComputersSince early 2007, United Mechanical and Apple have improved nearly 300,000 square feet of office and R&D space. These spaces have ranged from dedicated labs with 24/7 computer room air handling units to ultra modern and high-end exposed spaces meant to attract and retain the new generation of employee. As an industry leader in the field, Apple is among a select group of companies that have the environment in mind and has voluntarily registered their two most recent projects with the USGBC to attain a LEED Gold Rating. As one of Apple’s approved vendors, United Mechanical is committed to providing HVAC&R systems that have our engineering staff thinking outside the box in our designs while maintaining an efficient and functional system. The relationship with Apple and United Mechanical remain ongoing. |
 |
BEA HeadquartersThis 18 story structure was built in 2000 but stood empty until BEA purchased it in 2007. The building consists of 12 Class A build out floors. The first 5 floors consist of the infrastructure necessary to support their business. This infrastructure includes an auditorium for all hands meetings and customer presentations; an executive briefing center, a full service kitchen and cafeteria, training center, and a corporate data center. This design build project was performed using LEED techniques. General Project Data
|
Additional Office R&D Projects:
|
|
High Tech / Data Center
 |
EquinixThis was an existing 200,000 sq. ft. data center that Equinix took over. United Mechanical did a complete upgrade of the air distribution, added redundancy and upgraded the condenser water system. The controls were upgraded and the facility was fully commissioned. General Project Data:
|
Cisco 12This was an expansion of an existing Data Center. The facility remained in operation while we upgraded the base system on the roof and added to the capacity redundancy on the data floor. General Project Data:
Additional High Tech Data Center Projects
|
|
Bio Pharmaceutical
Abbot Vascular LabsUnited Mechanical installed all the necessary piping for this hydronic system at Abbott Vascular in Santa Clara. A 210,000 square foot building with 54,000 square foot project area complete with boiler, hot water and chilled water pumps, condenser water, chilled water and hot water piping and a water treatment system, for the new chilled water plant. General Project Data:
|
Institutional
 |
San Jose Regional MedicalGeneral Project Data
|
 |
Family Community ChurchThis design build project for a church going into two cold shells. The system consists of a 130 ton air cooled chiller with an ice storage system that allows the chiller to be off during peak demand hours. On the roof we installed chilled water air handlers with VAV controls. There is a dual boiler system for preheat. The buildings are controlled by a Trane Tracer DDC controls system. General Project Data
Additional Institutional Projects
|
Architectural Sheet Metal
 |
Santa Clara University LibraryThe Santa Clara University Library project is a three story building with a basement totaling approximately 140,000 square feet. United Mechanical worked with the architect and the general contractor to ensure that a high quality, long lasting roof would be installed by the owner. The end result was the installation of over 25,000 square feet of mechanically seamed 16 ounce copper roof panel installed over self adhered sheet membrane underlayment and approximately 1,200 square feet of a 16 ounce copper fascia. The copper metal roof system also has an integral 24” wide gutter built into the roofing system. 7,000 square feet of copper soffit panels installed at the roof overhangs designed and manufactured in house by United Mechanical. |
 |
SRV TowersUnited Mechanical installed 20,000 square feet of pre-finished custom made 20 gauge metal siding at the building roof parapets and terrace parapets. There were thousands of lineal feet of stainless steel flashing as well as two entry canopies clad with a custom color composite panel. The material was fabricated in house by skilled United Mechanical employees for total quality control. General Project Data
Additional ASM Projects
|
